Serves Florence
Duke Energy Progress
- Average home rate (2024)
- 14.88¢/kWh
- Paid for exported solar
- about 2.6–4¢ per kWh
- Net-metered home solar, utility-wide
- 2,341
Commercial solar · Florence, SC
Commercial solar in Florence is sized to daytime load: a business on Duke Energy Progress at an average 14.9¢ per kWh uses most of its output on site, which is where the value is.
Why the numbers favour business · as of July 2026
Duke Energy Progress credits exported power at roughly 2.6–4¢ per kWh against your full retail rate rate, so the value sits in consuming your own production. A Florence business that runs through daylight hours self-consumes most of what it generates, which is exactly what the current Duke's current residential solar rate structure structure rewards. That is a structural advantage over a typical home.
Looking for a solar company in Florence? See solar companies in Florence: our local team, costs and a free assessment.
Free roof and bill assessment
Takes under a minute. No pressure, and no guaranteed-savings math.
Local commercial reality
Florence has an unusually good commercial mix for solar: medical facilities, distribution and logistics property along the interstate corridor, and the retail and services of a regional hub. Distribution buildings offer large simple roofs and daytime operation; medical facilities offer steady, heavy, genuinely daytime load. Both are stronger candidates than a typical office.
Duke Energy Progress credits exported power at roughly 2.6 to 4 cents, so the commercial case here rests almost entirely on self-consumption. That favours buildings that run hard through the middle of the day, and it argues for sizing to the load curve rather than to the roof. An oversized array on a Florence commercial building is capacity sold at a few cents, which is not a business case.
Demand charges are the other half of the analysis and they matter more here than most owners expect. For many commercial tariffs the demand component rivals the energy component, and whether solar reduces billed demand depends on when your peak occurs. We read interval data before making any claim about it, because getting that wrong is the most common way a commercial solar projection overstates its case.
Written for Florence specifically.
How we work
We start from interval data and the Duke Energy Progress tariff, then check roof structure and service capacity before quoting a size.
How we scope a building
Your Duke Energy Progress interval data and tariff, read before anything is sized.
Low-slope membrane, standing-seam metal or ballasted, plus service capacity and switchgear. Inland, so salt exposure is not a factor and wind loading is lower than on the coast. Florence County structural review and South Carolina code still apply.
Building and electrical permits with plan review, structural sign-off, and Duke Energy Progress interconnection.
Sequenced around your operations, then Florence County inspection and monitoring handover.
Commercial systems carry our lifetime full-system and roof-penetration warranty alongside manufacturer coverage, so one contractor stands behind the roof and the array.
Florence specifics
The constraints that actually shape a Florence commercial design.
Inland, so salt exposure is not a factor and wind loading is lower than on the coast. Florence County structural review and South Carolina code still apply.
Duke Energy Progress approval precedes energising, and the queue rather than the install usually sets your date.
Fewer architectural-review constraints than the Lowcountry markets. Newer subdivisions have HOAs, but historic-district style controls on panel visibility are rare here.
Tax
We build and document a Florence system for your CPA; South Carolina commercial tax treatment depends on your entity, so it is theirs to call.
Permits and approvals
6 approvals for a Florence system. We file every one.
Rebate:Duke's PowerPair solar-and-battery incentive closed to new applications in Progress territory in late 2025, so it should not be counted on here. Duke's battery bill-credit programme has remained open and pays a monthly credit rather than cash up front. We confirm current status for your address rather than promising a programme that may be full.
Local factors
Pee Dee lots are often generously sized with pines around the house rather than over it, so full-day shading is less common here than in the older coastal cities.
Fewer architectural-review constraints than the Lowcountry markets. Newer subdivisions have HOAs, but historic-district style controls on panel visibility are rare here.
Hot Pee Dee summers drive heavy cooling load through the afternoon, and storms coming inland off the coast still cause outages on this part of the grid.
Your utility decides payback
Your utility sets what exported power is worth, which shapes the right system size more than any panel choice.
Serves Florence
For comparison: South Carolina average 14.23¢ · U.S. average 16.48¢. South Carolina had 40,055 net-metered home solar systems at the end of 2024.
Rates: US EIA Form EIA-861, 2024 averages incl. fixed charges, not tariffs. Export terms as of July 2026.
Florence sun, month by month
About 13,510 kWh a year from a south-facing roof with no shade. May is the strongest month at about 1,288 kWh and December the weakest at about 835 kWh.
Your roof will differ. Pee Dee lots are often generously sized with pines around the house rather than over it, so full-day shading is less common here than in the older coastal cities.
Estimate: NASA POWER sun data for Florence, PVWatts model, south-facing, no shade.
Our work
Our own job photos, not stock or renders. Inland, so salt exposure is not a factor and wind loading is lower than on the coast.






Photo locations are not published.
Free assessment · Florence, SC
We read your bill, confirm your Duke Energy Progress export terms, and tell you what your roof in Florence County will actually carry, and say so if it will not pay.
Prefer to talk? (843) 310-1128
Florence commercial solar FAQ
Often yes, for a structural reason. Duke Energy Progress credits exported power at roughly 2.6–4¢ per kWh against your full retail rate, so the value is in consuming your own production. A business that operates through daylight hours self-consumes most of what it generates, which is precisely what the current Duke's current residential solar rate structure structure rewards.
A building permit and an electrical permit, with standard plan review for systems of roughly 10 kW and above, which covers essentially all commercial work. Inland, so salt exposure is not a factor and wind loading is lower than on the coast. Florence County structural review and South Carolina code still apply. Duke Energy Progress interconnection approval is required before energising.
It is sized to the building's daytime load rather than to the roof. Each kW here makes about 1,422 kWh a year unshaded, so a 50 kW array makes roughly 71,100 kWh. Duke Energy Progress households paid about 14.9¢ per kWh on average in 2024.
Yes. A building permit and a separate electrical permit for a rooftop system; Standard plan review for systems of roughly 10 kW and above. We pull all of it through Florence County.
Duke Energy Progress households paid about 14.9¢ per kWh on average in 2024. A 100 kW array in Florence makes roughly 142,000 kWh a year; the share used on site is worth the retail rate, exports earn about 2.6–4¢ per kWh.
Nearby
Keep reading
Track South Carolina commercial solar from utility identification and application through studies, design changes, inspection, metering, and written PTO.
19 min readBuild a traceable commercial solar utility-data package with bills, meter maps, interval files, operating changes, exceptions, and a model handoff.
20 min readBuild a commercial solar feasibility study that verifies site, load, utility, design, and approval evidence before your South Carolina project goes to bid.
23 min readCompare commercial solar proposals on one scope: parties, design, production, price, utility work, contract risk, warranties, and acceptance evidence.
21 min readAudit commercial solar ROI in South Carolina using interval loads, tariffs, production, lifecycle costs, tax timing, NPV, IRR, and sensitivity.
30 min readVerify commercial solar turnover with controlled as-builts, inspections, PTO, test records, monitoring, training, warranties, spares, and punch lists.
20 min readFree, no-pressure assessment
We will read your interval data and tariff, review your roof structure and service capacity, and give you an honest scope, with no guaranteed-savings math.
Mon–Sat, 10am–6:30pm ET · We typically follow up within the hour.